manualshive.com logo in svg

Gems LDS4, Operation Manual, Page: 61 / 71

Share
Download
Gems LDS4 Operation Manual Download Page 61

55

Appendix A: Menu Commands

© 2009 General Engine Management Systems Ltd.

Appendix A: Menu Commands

11

This section provides an overview of all the available menu commands.

11.1

File

The file menu contains commands for managing and uploading colour display setups.

·

New - Creates a new setup.

·

Open... - Opens an existing setup.

·

Reopen - Provides quick access to the most recently used setups.

·

Save - Saves the current setup with the current filename.

·

Save As... - Saves the current setup with a new filename.

·

Upload... - Uploads the current setup to the display.

·

Close... - Close the calibration.

·

Read Only - Puts the editor in read only mode. This prevents accidental altering of the
setup.

·

Exit - Exits LDS4 Colour Display System.

11.2

Display

The display menu allows a screen page to be opened for editing.

·

Monitor... - Allows the outputs monitored on the 

monitor

 page to be specified.

·

Screen X - Shows screen X.

·

All - Shows all sixteen screens in the setup.

11.3

Setup

The Setup menu allows the non-visual aspects (such as CAN setup or scaling factors) of the
colour display to be set up.

·

Display... - Shows the display setup editor where the outputs used in gauges on the screen
pages are created and edited.

·

Controller... - Allows the CAN codes on which 

page select

 and 

button source

 messages are

received to be specified.

·

Co Driver - Allows the 

co-driver

 specific functionality to be defined.

·

CAN Outputs - Allows the 

CAN transmit

 function to be setup.

·

LDS3 - Allows the 

LDS3 driver display

 to be setup.

·

Odometer - Setup of the 

odometer

 function.

·

Serial Comms Setup - Allows the serial data receive to be setup.

·

LDS4 Settings - Allows the LDS4 brightness and low side driver to be configured.

·

Import GEMS Logger Setup... - Imports a logger setup into the display setup. This allows
the colour display to use the same outputs and sensor calibrations as the data logger and
data analysis software.

·

Create New External CAN Setup... - Sets the data source to be a user defined set of CAN
messages..

·

Edit External Source... - Allows the user defined CAN messages to be configured.

Summary of Contents for LDS4








































































Reviews:

No comments