manualshive.com logo in svg

Gems LDS4, Operation Manual, Page: 56 / 71

Share
Download
Gems LDS4 Operation Manual Download Page 56

50

LDS4 Colour Display System

© 2009 General Engine Management Systems Ltd.

LDS4 Colour Display System

LDS4 Hardware

10

The LDS4 is a fully customisable colour based around an ultra-bright AMOLED display. It is
suitable for use by drivers, co-drivers, single seat racing cars. It can be supplied in a case or
uncased for mounting directly into a steering wheel. The cased LDS4 is available fitted with 2 x 9
pin auto sport connectors or with a 25 way Souriau.

Features

·

Ultra clear AMOLED display technology.

·

Viewable in direct sunlight.

·

Fully customisable with What You See Is What You Get (WYSIWYG) Windows© editing
software.

·

Boots in less than one second.

·

24 pages selectable by input pot or CAN.

·

16 Gauge types inc: Bar Tacho, Rev Lights, Variable text.

·

Beacon input for lap timing.

·

Screen: 480x272 pixel resolution, true colour.

·

Screen viewable area: 95mm x 54mm.

·

2 Speed inputs.

·

Analogue inputs - number dependent on connector type

·

1 CAN bus.

·

2 Serial receive ports for data streams from ECU or SMS1 support.

·

Size: 107mm x 70mm x 22mm.

·

Typical power consumption at 12V: <0.6A

10.1

LDS4 Souriau

10.1.1 LDS4 Souriau Pin out

The LDS4 Souriau and LDS4 Uncased have the following pin out:

Connector

Loom: Souriau 8MCNF25SO11B

View of connector from loom side with pin numbers:

Summary of Contents for LDS4








































































Reviews:

No comments