13
RPort Function
:
you can setup the RPort Enable/Disable in this page. To change this setting,
please following your ISP information. When you finish the setting, please click the Submit button.
Other Settings
:
you can setup the Hold by RFC, Voice/SIP QoS and SIP expire time in this page. To
change these settings please following your ISP information. When you finished the setting, please
click the Submit button. The QoS setting is to set the voice packets’ priority. If you set the value
higher than 0, then the voice packets will get the higher priority to the Internet. But the QoS function
still need to cooperate with the others Internet devices.
6.8
NAT Trans.
In NAT Trans. you can setup STUN function.
STUN Setting
:
you can setup the STUN Enable/Disable and STUN Server IP address in this page.
This function can help your working properly behind NAT. To change these settings please
following your ISP information. When you finish the setting, please click the Submit button.