GEM
ORO ULTRATESTER 3+
16
17
4. To turn the UltraTester 3+ OFF,
press the oval shaped power
button once again
I
and hold
it down for approximately one
second, then release the button.
The power button’s blue LED
indicator will no longer be
illuminated indicating it has been
turned OFF. If the UltraTester
3+ has been left on for a period
of approximately 5 minutes
without being used, it will
automatically turn itself OFF.
5. The UltraTester 3+ is also
equipped with a PATENTED
color-coded light pipe and probe
tip cone indicator. This line of
sight colored indicator allows
the user to easily see the test
results while keeping their eyes
on the stone being tested.
GREEN
= Diamond
BLUE
= Moissanite
PINK
= Sapphire
RED
= Metal Alert
6.
Prior to using the UltraTester
3+, be certain to REMOVE THE
WHITE CAP at the front end of
the tester that serves to protect
the probe tip from accidentally
being bent or broken
J
.
The
cap may be easily removed by
simply applying a minimal amount
of pressure to the sides of the
cap, as you hold it between
your thumb and forefinger.
Then gently pull it out and off.
Always replace the cap when
the UltraTester 3+ is not in use.
7. To properly hold the UltraTester
3+, it is important to grasp the
tester with your thumb and
forefinger while touching them
to the PATENTED finger pads
located on either side of the
tester
K
. This will allow you to
easily manipulate the tester and
make the best contact with the
stone being tested. While holding
the tester, its ergonomic shape
allows it to comfortably rest
on the top of your hand. If you
hold the tester without touching
the finger pads, the metal alert
feature will not function.
8. The LED Illuminator allows the
user to easily see the stone being
tested to confirm that only the
PROBE TIP CAP
J
HOW TO PROPERLY HOLD THE TESTER
K
