GEM
ORO ULTRATESTER 3+
6
7
or identity of the gemstone being
tested. The final determination
of the identity of any gemstone,
whether genuine or not, should only
be made by a trained gemologist.
Neither GemOro nor any of its
affiliates, dealers, or distributors
shall be held liable for any loss
and/or damages associated with
the use of the UltraTester 3+. No
warranties exist with respect to the
UltraTester 3+ or its use other than
those expressly contained herein.
All other warranties of any kind
or character whatsoever, whether
expressed or implied, including
warranties of merchantability or
fitness for a particular purpose, are
hereby disclaimed and are excluded
from the warranties hereunder.
In the event that a claim is made
with respect to the UltraTester 3+
or its use, the maximum liability of
GemOro, and its affiliates, dealers,
and distributors shall be the amount
paid for the UltraTester 3+.
PLEASE READ BEFORE USING THE
PROVIDED NiMH RECHARGEABLE
BATTERIES:
Before using the NiMH
rechargeable batteries that have
been provided with your tester, the
batteries should be fully charged
as indicated by the small round
LED indicator next to the power
button glowing green when the
UltraTester 3+ is plugged in. While
the batteries are being charged,
the tester may be used as desired
while powered by the AC current.
CONDITIONS FOR
IDEAL OPERATION
1. The UltraTester 3+ should be used
in the following environmental
conditions. Both the tester and
the stone being tested must
be the same temperature. By
not following these instructions
you risk compromising the
accuracy of the test.
a. Temperature: 65°F-80°F
(18°C-27°C)
b. Air Relative Humidity: 45%-75%
2. The stone being tested must be
dry. If the surface of the stone is
wet or has any type of surface
moisture it may not test correctly.
3. The stone being tested must be
clean. Aside from obvious visible
dirt that may be present on the
stone, there may also be hand,
body oil or other contaminates on
the stones surface that may not
be visible and which could impact
the accuracy of the test. Always
be certain to clean the stone being
tested with an ultrasonic or steamer
or other appropriate means, and
thoroughly dry it and/or remove
any cleaning chemicals remaining
on the stone prior to testing. A
GemOro STONE TESTING CLOTH
(shown below) has been provided
with each UltraTester 3+ and for
convenience it should be used to
wipe any hand or body oil from
the stones surface prior to testing.
