Gemini GEB12DW2, Manual

Page: 6 / 12

6
• Before cleaning the blanket, unplug it from the mains outlet and let it cool down
completely or for at least ten minutes.
• The blanket is equipped with a detachable cable. Disconnect the plug and remove the
cable from the blanket.
• You may wash the blanket gently by hand. The best way to do this is to put the
blanket in a bath with lukewarm water and some mild detergent and then gently
squeeze it out.
• Do not use hair dryer to dry this product, have to dry naturally, stretch the blanket out
on a flat surface.
• Rinse the blanket several times to remove all the detergent.
• Store the blanket in a clean and dry place, laid out flat with nothing covering or resting
on top of it.
• Only use the blanket once it is completely dry.
• You may also wash the blanket in a washing machine at a maximum temperature of
30ºC with low mechanical action and spin. It’s advisable to wash it by hand in order to
prolong the life of the product.
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless
of whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally
acceptable manner.
Consult your local authority or your supplier for information about disposal.
Name : Double Electric Blanket
Model No.: GEB12DW2
Power supply & frequency: 220-240V~ 50 Hz
Heat output : 60 W x 2
Switching levels : 0 - 1 - 2 - 3
CLEANING AND MAINTENANCE
DISPOSAL
TECHNICAL SPECIFICATIONS
Dimensions : 160(L) x 140(W) cm
Weight : 1.88 kg
Operating conditions : for dry use only
Storage conditions : clean and dry area
OPERATION
It is recommended that the blanket to be switched on (in position 3) 30 minutes before going
to bed.
Plug the blanket into the mains outlet and turn the selector switch on the controller from
position 0 to position 1. The red power indicator will light up. You will feel the blanket
gradually warming up. This will be even more noticeable if it is covered with a quilt. If
you require a higher temperature setting, turn the switch to the position 2 or to position 3.
Should the blanket get too warm for you, turn the switch back to position 2 or to position 1.
Position 2 and 3 of the blanket is intended for heating up, only position 1 is for continuous
operation. Move the selector switch to position 1 before falling asleep.
To switch off the blanket, turn the switch to position 0. The red power indicator will go
off, indicating that the unit is switched off. Now unplug the blanket from the mains outlet.
* The final product specification may be varied according to a different lot of
material and actual input voltage power of the usage area.