User guide – Plotter Flexipen 120/165
Plan
10
5.2
How to fix paper on the recovering paper reel spindle:
- Bring up all pressing wheel using the up/down levers on the top back side of the
plotter.
-
Pass the paper between the pressing wheel and the contact surface, and unfold it
till reaches the recovering bar;
-
Bring down the pressing wheel using the up/down levers.
-
Stick the paper on both sides of the recovering paper reel spindle using adhesive
paper band. Stick laterally the adhesive paper band to remove easily the paper
from the recovering paper reel spindle.
-
Keep paper at the middle of the recovering paper reel spindle with the right hand
and with the left hand keep tight the paper roll from the feed paper reel spindle;
-
Roll on 3-4 coil on the recovering paper reel spindle, and make sure that the paper
is not wrinkled and that is evenly stretched;
-
Mount the slide bars in the guiding places to keep the paper tight;
-
Switch on the button from the connections machine frame;
-
Switch on the power;
-
The feed paper reel spindle will automatically feed till the paper gets right in front of
the paper placement sensor;
-
At this moment the paper is fully loaded.
Do not use wet paper, unsmooth paper, or which has unstraight ends.
Use only smooth paper, of 40
÷
100g/m² and the weight cannot be more than
30Kg.
