31.0 - EXAMPLE OF SHOCK SENSOR ADJUSTMENT
To better understand the shock sensor adjustment procedure, please find here
below an example where the sensor will be adjusted into third level.
While the system is disarmed, turn the ignition key into “ON” position.
The LED will light for about 1”.
Meanwhile, push the button N. 2 of the remote and push it again in two
seconds.
The system will confirm with two LED flashes and the two acoustic signals
with acute tone that the shock sensor adjustment procedure is entered.
Push three times the button N. 2 of the transmitter.
A LED flashing and an acoustic signal correspond to each pressure.
Turn the ignition key of the vehicle in “OFF” position.
The system confirm the end of the procedure by an optical signal of the
LED and an acoustic signal of the control unit.
Declaration of conformity to type
Dichiarazione di conformità
I hereby declare that the product
(Name of product, type or model, batch or serial number)
Is conform to all relevant essential requirements of the R&TTE-directive
1999/5/EC, issued March 9,1999. According to Annex IV of the R&TTE
directive. The following standards and essential radio test suites published in
the “Official Journal” of the European Communities, have been used to
demonstrate the conformity of the product:
Qui di seguito si dichiara che il prodotto
(nome del prodotto o modello, categoria o numero di serie)
7208E - 7218E
Product in class 1 frequency identification - subclass 20
Electrical safety:
Radio and spectrum parameters:
Electromagnetic compatibility EMC:
Prodotto in frequenza identificata come classe 1 - sottoclasse 20
Sicurezza elettrica:
Radio e parametri di trasmissione:
Compatibilità elettromagnetica EMC:
The product can be used in the following European Countries:
Il prodotto può essere immesso nei seguenti Stati Europei:
Company responsible for placing on the market:
Società responsabile per l’immissione nel mercato:
Address:
Indirizzo:
Point of contact:
Persona di contatto:
Bodio Lomnago - 19/09/2003
(Place, date) -
(Luogo, data)
(Signature) -
(Firma)
Via Luigi Galvani 12 - 21020 BODIO LOMNAGO
(VA) - ITALY
Andrea Rossi
A, B, D, DK, F,
FR, GR, IR, I, L,
NL, P, SP, S, UK
GEMINI
TECHNOLOGIES
S.p.A.
EN 60950-1 (2001) + A11 (2004)
EN 300220-2 V2.1.1 EN 50371 (2002)
EN 301489-3 V1.4.1 EN 301489-1
V1.6.1
EN 60950-1 (2001) + A11 (2004)
EN 300220-2 V2.1.1 EN 50371 (2002)
EN 301489-3 V1.4.1 EN 301489-1 V1.6.1
Soddisfa tutti i requisiti applicabili alla tipologia del prodotto e richiesti dalla
regolamentazione delle telecomunicazioni secondo direttiva R&TTE
1999/5/CE allegato IV tramite l’utilizzo delle norme pubblicate nella gazzetta
ufficiale della Comunità Europea: