6
During Power On or while pressing SW1 button;
LED(D5) flash for 3 times follow with a short period of
light out(about 5 seconds) for system reinitiating
process. When system regains its working stage, the
LED (D5) should flash in a 1 second interval.
Step 4. Insert the SD card (optional) into the SD card slot
as shown below. (figure 6)
。
Figure 6. Insertion of SD memory storage card
Caution
：
During Power ON or while pressing SW2 button; press and
hold 5 seconds continuously then release, will be restored
to factory default.
Make sure your iCam33 Network Camera are using the provided
power adaptor, using unauthorized power adaptor may due
damage to the Network Camera.
Summary of Contents for iCam33
Page 1: ...iCam33 User s Guide...
Page 10: ...CAM_EZ Search diagram 8...
