iCam33 User’s Guide
Internet Protocol Camera
the camera.
1. Click on the Network button and then on the Network
Assignment
2. Configure each the camera with a different LAN IP
address as per the following table.
Camera IP Address Subnet Mask Gateway HTTP port
A 192.168.1.100 255.255.255.0 192.168.1.1 80
B 192.168.1.200 255.255.255.0 192.168.1.1 80
C 192.168.1.300 255.255.255.0 192.168.1.1 80
3. Then click the Submit button to save your changes.
Don't forget to set each camera differently.
Note: Once you have changed the IP address of each camera it will no
longer be accessible to the computer until you have change the
computers IP address.
4. Connect each camera to a different port on the Network
Configuring Port forwarding on the Router
1. Connect your computer to the Network switch on the LAN of
the router.
2. Change the IP address of your Computer to be 192.168.1.150
(in the default subnet of the router)
3. Open a web browser and browse to the default IP address of
the Router to open the router's one page setup.
4. From the menu, choose Show Advanced settings then choose
Port Forwarding / Virtual Server
5. Enter the IP addresses and ports given in the table below
clicking 'Add this setting' until you have all entries looking like the
following.
39
Summary of Contents for iCam33
Page 1: ...iCam33 User s Guide...
Page 10: ...CAM_EZ Search diagram 8...
