iCam33 User’s Guide
Internet Protocol Camera
4.4 Motion Detection Setup
You can also use right click control to set two predefined
motion detection areas,and set motion detection levels for
each area. Right click on the image to display the drop
down menu and select on the Motion detection option with
the mouse. Motion
detection must be enabled ont he alerts page for motion
detection to operate.
Click 1 to set motion detection area 1. Use the mouse to
draw a square on the screen. Click and hold the left mouse
button and drag the square across the area to be
monitored. Repeat the procedure to set area 2. This function can
be enabled in 640x480 and 320x240 display mode. Whole the
image area is detected when in 160x120 display mode.
Click Motion Detect Set to set a sensitivity level for each area,
15 is most sensitive, 1 is least sensitive.
Enable motion detection on the alerts page, see “Event Triggling”
for details.
17
Summary of Contents for iCam33
Page 1: ...iCam33 User s Guide...
Page 10: ...CAM_EZ Search diagram 8...
