4- Setting Device Operation Modes
Pump, Lights and AUX outputs of the device can be set to operate with different
independent mode settings. Therefore, it is required to define the individual
operating modes for each item.
Continuous ON / Continuous OFF / OtO - Automatic
(OtO - operating with
pre-set timer settings)
For Pump output operating mode: - (Menu item 12)
The Pool Control Mono needs to be in ‘OFF’ mode to access settings. In OFF
mode, turn the Settings dial/button CLOCKWISE to scroll through the program
setting options until Pump Mode is reached - either
P.On / P.OFF / P.OtO
is
shown on the main display. Press the dial/button to ENTER in order to
switch between the 3 modes. The display then flashes.
By turning the setting button, you can switch between the 3 modes modes.
To confirm a chosen, press the dial/button again.
P.On:
Pump output is “on mode” continuously. Previous scheduled timer
programs will not apply.
P.OFF:
Pump output is “off mode” continuously. Previous scheduled timer
programs will not apply.
P.OtO:
Pump output is “OtO” (automatic). The Pump operates according to
scheduled timer programs.
For Light output operating mode: - (Menu item 13)
The Pool Control Mono needs to be in ‘OFF’ mode to access settings. In OFF
mode, turn the Settings dial/button CLOCKWISE to scroll through the program
setting options until Light Mode is reached - either
L.On / L.OFF / L.OtO
is
shown on the main display. Press the dial/button to ENTER in order to switch
between the 3 modes. The display then flashes.
By turning the setting button, you can switch between the 3 modes modes.
To confirm a chosen, press the dial/button again.
L.On:
Lights output is “on mode” continuously. Previous scheduled timer
programs will not apply.
L.OFF:
Lights output is “off mode” continuously. Previous scheduled timer
programs will not apply.
L.OtO:
Lights output is “OtO” (automatic). The Pool Lights operates according
to scheduled timer programs.
For Auxiliary Item AUX output operating mode: - (Menu item 14)
The Pool Control Mono needs to be in ‘OFF’ mode to access settings. In OFF
mode, turn the Settings dial/button CLOCKWISE to scroll through the program
setting options until Auxiliary Mode is reached - either
A.On / A.OFF / A.OtO
is shown on the main display. Press the dial/button to ENTER in order to
switch between the 3 modes. The display then flashes.
By turning the setting button, you can switch between the 3 modes modes.
To confirm the required mode, press the Settings dial/button again.
A.On:
Auxiliary item output is “on mode” continuously. Previous scheduled
timer programs will not apply.
A.OFF:
Auxiliary item output is “off mode” continuously. Previous scheduled
timer programs will not apply.
A.OtO:
Auxiliary item output is “OtO” (automatic). The Auxiliary item operates
according to scheduled timer programs.
If you wish to use the “OtO” mode for Pump, Lights and/or AUX. You
will need to set Startup/On and Shut down/Off times for these items
individually as follows:
4
