background image

 

 

ii 

 

© 2000-2016 Gemalto NV. All rights reserved. 
Part Number 007-007474-008 
Version 5.2 

Trademarks 

All intellectual property is protected by copyright. All trademarks and product names used or referred to are the 
copyright of their respective owners. No part of this document may be reproduced, stored in a retrieval system or 
transmitted in any form or by any means, electronic, mechanical, chemical, photocopy, recording or otherwise without 
the prior written permission of Gemalto. 

Gemalto Rebranding 

In early 2015, Gemalto NV completed its acquisition of SafeNet, Inc. As part of the process of rationalizing the product 
portfolios between the two organizations, the HSM product portfolio has been streamlined under the SafeNet brand. As 
a result, the ProtectServer/ProtectToolkit product line has been rebranded as follows: 

Old product name 

New product name 

Protect Server External 2 (PSE2) 

SafeNet ProtectServer Network HSM 

Protect Server Internal Express 2 (PSI-E2) 

SafeNet ProtectServer PCIe HSM 

ProtectToolkit 

SafeNet ProtectToolkit 

Disclaimer 

All information herein is either public information or is the property of and owned solely by Gemalto NV. and/or its 
subsidiaries who shall have and keep the sole right to file patent applications or any other kind of intellectual property 
protection in connection with such information. 

Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any 
intellectual and/or industrial property rights of or concerning any of Gemalto’s information. 

This document can be used for informational, non-commercial, internal and personal use only provided that: 

 

The copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in 
all copies. 

 

This document shall not be posted on any network computer or broadcast in any media and no modification of 
any part of this document shall be made. 

Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities. 

The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise 
expressly agreed in writing, Gemalto makes no warranty as to the value or accuracy of information contained herein. 

The document could include technical inaccuracies or typographical errors. Changes are periodically added to the in-
formation herein. Furthermore, Gemalto reserves the right to make any change or improvement in the specifications 
data, information, and the like described herein, at any time. 

Gemalto hereby disclaims all warranties and conditions with regard to the information contained herein, including all 
implied warranties of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall 
Gemalto be liable, whether in contract, tort or otherwise, for any indirect, special or consequential damages or any 
damages whatsoever including but not limited to damages resulting from loss of use, data, profits, revenues, or custom-
ers, arising out of or in connection with the use or performance of information contained in this document. 

Gemalto does not and shall not warrant that this product will be resistant to all possible attacks and shall not incur, and 
disclaims, any liability in this respect. Even if each product is compliant with current security standards in force on the 
date of their design, security mechanisms' resistance necessarily evolves according to the state of the art in security and 
notably under the emergence of new attacks. Under no circumstances, shall Gemalto be held liable for any third party 
actions and in particular in case of any successful attack against systems or equipment incorporating Gemalto products. 
Gemalto disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that 
result from any use of its products. It is further stressed that independent testing and verification by the person using the 

Summary of Contents for SafeNet ProtectServer













































Reviews: