Rev. 00 01/20
OptiSelect Pro GM04-E
Product description
17
Typical properties
– characteristics of the functions
Remote control
Three possibilities are available:
1
Change the powder Activate/stop rinsing process (factory
setting)
2
Program Activate/stop rinsing process
3
Change the powder Activate/stop the PowerBoost function
The respective option is set in the OptiStar control unit in
accordance with system parameter P12.
– See therefore the corresponding operating manual.
– Adapt powder output (The powder output is correspondingly
increased or reduced)
– Program change (It is switching between programs P01-P20)
– Activating/Deactivating the rinse mode: the entire powder line
from the suction area to the gun is rinsed
– direct temporary activation of the PowerBoost function. Press
again to return to the previous setting. (See therefore the
corresponding OptiStar CG21/CG23-P operating manual)
Powder hose quick release connection
– Quick and simple connection and disconnection from powder
hose and application cup
– Protective function through to grounded clip ring
Connection for SuperCorona Ring
– –
Quick and simple connection to and disconnection from
the SuperCorona ring
Summary of Contents for OptiSelect Pro GM04-E
