Gema OptiFlex Pro BN, Operating Instructions And Spare Parts List

Page: 29 / 60

Rev. 01 08/20
OptiFlex Pro BN Operation

29
Description Presetting
Powder output 60 %
(50% for device type CF)
Total air 4.0 Nm³/h
(2.5 Nm³/h for device type CF)
High voltage 80 kV
Spray current 20 µA
Electrode rinsing air 0.1 Nm³/h
Fluidizing air 1.0 Nm³/h (for device type F)
0.1 Nm³/h (for device type B and S)
Setting powder output and powder cloud
The powder output depends on the selected powder output (in %), and
the powder cloud on the selected total air volume.
As a factory default value, a powder rate of 50% and a total air
volume of 4 Nm³/h are recommended.
– If values are entered that the gun control unit cannot implement,
then the operator is informed of this by a blinking in the relevant
display and a temporary error message!
Setting the total air volume
1.
Adjust the total air volume on the gun control unit with the T3/T4
keys
– Adjust the total air volume according to the corresponding coating
requests
correct powder cloud too little total air
Setting the powder output
1. OR