Gema OptiFeed B, Operating Instructions And Spare Parts List

Page: 5 / 33

V 04/07
OptiFeed B Fresh powder system General safety regulations • 3
General safety regulations
This chapter sets out the fundamental safety regulations that must be fol-
lowed by the user and third parties using the OptiFeed B Fresh powder
system.
These safety regulations must be read and understood before the
OptiFeed B Fresh powder system is used.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the ITW
Gema operating instructions. The general safety precautions must also
be followed as well as the regulations in the operating instructions.
DANGER!
Danger due to live electricity or moving parts. Possible consequences:
Death or serious injury
WARNING!
Improper use of the equipment could damage the machine or cause it to
malfunction. Possible consequences: minor injuries or damage to equip-
ment
INFORMATION!
Useful tips and other information
Conformity of use
1. The OptiFeed B Fresh powder system is built to the latest speci-
fication and conforms to the recognized technical safety regula-
tions. It is designed for the normal application of powder coating.
2. Any other use is considered as non-conform. The manufacturer
is not responsible for damage resulting from improper use of this
equipment; the end-user alone is responsible. If the OptiFeed B
Fresh powder system is to be used for other purposes or other
substances outside of our guidelines then ITW Gema AG should
be consulted.
3. Observance of the operating, service and maintenance instruc-
tions specified by the manufacturer is also part of conformity of