background image

 V 

12/13  

OptiFlex A1 (AS07) 

General safety regulations  

  3 

General safety regulations 

This chapter sets out the fundamental safety regulations that must be 
followed by the user and third parties using the OptiFlex A1 (AS07) 
control system. 

These safety regulations must be read and understood in full before the 
OptiFlex A1 (AS07) control system is put into operation. 

Safety symbols (pictograms) 

The following warnings with their meanings can be found in the Gema 
Switzerland operating instructions. The general safety precautions must 
also be followed as well as the regulations in the operating instructions. 

 

DANGER!

 

Danger due to electrically live or moving parts. Possible consequences: 
death or serious injury 

 

WARNING!

 

Improper use of the equipment could damage the machine or cause it to 
malfunction. Possible consequences: minor injuries or damage to 
equipment 

 

INFORMATION!

 

Useful tips and other information 

 

Proper use 

1.  The OptiFlex A1 (AS07) control system is built to the latest 

specification and conforms to the recognized technical safety 
regulations and is designed for the normal application of powder 
coating. 

2.  Any other use is considered non-compliant. The manufacturer 

shall not be liable for damage resulting from such use; the user 
bears sole responsibility for such actions. If the OptiFlex A1 
(AS07) is to be used for other purposes or other substances 
outside of our guidelines then Gema Switzerland GmbH should 
be consulted. 

Summary of Contents for AS07
























Reviews: