![GEM SUPM SUMONDO Operating Instructions Manual Download Page 16](http://html1.mh-extra.com/html/gem/supm-sumondo/supm-sumondo_operating-instructions-manual_2206359016.webp)
www.gemu-group.com
16 / 37
GEMÜ SUPM
8 Manufacturer's information
8 Manufacturer's information
8.1 Delivery
●
Check that all parts are present and check for any damage
immediately upon receipt.
The product's performance is tested at the factory. The scope
of delivery is apparent from the dispatch documents and the
design from the order number.
8.2 Packaging
The product is packaged in a cardboard box which can be re-
cycled as paper.
8.3 Transport
1. Only transport the product by suitable means. Do not drop.
Handle carefully.
2. After the installation dispose of transport packaging ma-
terial according to relevant local or national disposal regu-
lations / environmental protection laws.
8.4 Storage
1. Store the product free from dust and moisture in its ori-
ginal packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see
chapter "Technical data").
4. Do not store solvents, chemicals, acids, fuels or similar
fluids in the same room as GEMÜ products and their spare
parts.
9 Installation in piping
9.1 Preparing for installation
WARNING
The equipment is subject to pressure!
▶
Risk of severe injury or death.
●
Depressurize the plant.
●
Completely drain the plant.
WARNING
The actuator cover is under spring pres-
sure!
▶
Risk of severe injury or death!
●
Do not open the actuator.
WARNING
Corrosive chemicals!
▶
Risk of caustic burns.
●
Wear suitable protective gear.
●
Completely drain the plant.
CAUTION
Sharp edges on the mounting plate!
▶
Risk of cuts!
●
Wear protective gloves.
CAUTION
Use as step.
▶
Damage to the product.
▶
Risk of slipping-off.
●
Choose the installation location so that the product can-
not be used as a foothold.
●
Do not use the product as a step or a foothold.
CAUTION
Exceeding the maximum permissible pressure.
▶
Damage to the product.
●
Provide precautionary measures against exceeding the
maximum permitted pressures caused by pressure
surges (water hammer).
CAUTION
Leakage
▶
Emission of dangerous materials.
●
Provide precautionary measures against exceeding the
maximum permitted pressures caused by pressure
surges (water hammer).