6
Manual ref: XPTZ635
Camera Setup
Baud Rate Setup
Setting the Baud Rate is done using the SW2 set of four
dip switches. The Baud Rate can be set to 2400bps,
4800bps, 9600bps or Auto as shown below.
Daisy Chain Formation
Star Formation
Terminal Resistor Setup
The PTZ635 has an in-built 120Ω terminal resistor.
When setting up multiple PTZs certain PTZs must
have their resistors enabled. When setting up PTZs
in a Daisy Chain formation the last PTZ must have its
resistor enabled. If you decide on a Star formation the
two furthest PTZs must have their resistors enabled.
2400bps
4800bps
9600bps
Resistor
Enabled
Resistor
Disabled
Auto