1 2
I n s t r u c t I o n m a n ua l
G X 7 0 0
INSTALLING THE UNIT
Gimbal Mounting
the mounting bracket can be rotated above or below the radio enabling the radio to be
mounted to a wide range of locations.
after choosing a location, hold the unit with the mounting bracket attached, to the desired
position and mark the location with a pencil. remove the mounting bracket from the radio
and drill the mounting holes. Bolt or screw the bracket in place using hardware suitable for the
mounting surface. the unit is supplied with stainless steel screws; however, if the mounting
surface is unsuitable for screws you may need to replace these with stainless steel bolts.
remember the fixings for overhead mounted units may have to withstand heavy pounding when
a vessel is in rough water or being towed on a trailer over rough road.
upright mounting
overhead mounting
Flush Mounting
the GX700 can be flush mounted using the optional mK008 flush mounting kit. a cutting
template and full mounting instructions are provided with the kit.
Flush mounting
using the
optional mK008
mounting kit
DC CONNECTIONS
connect the
RED
power lead to the Positive (+) side of the battery or to an accessory point in
the vessel or vehicle’s fuse box.
connect the
BLACK
power lead to the negative (-) side of the battery or to a ground point in
your vessel or vehicle.
IMPORTANT:
the rED power lead is fitted with a 10 amp fuse. If the fuse blows, use only a
standard 10 amp (3aG) fuse as a replacement. use of a higher rated fuse or a slow-blow type
could result in damage to your radio which would void the warranty.
If required, an extension speaker may be installed to improve sound levels in noisy environments
or in locations further away from the steering or driving position.
27MHz MARINE TRANSCEIVER
PR 1
PR 2
SCN
NL
DW
88
TW
SQL
VOL
PR 1
PR 2
SCN
LO
DW
16
TW
VOL
VHF MARINE TRANSCEIVER
WX
SQL
Summary of Contents for GX700
Page 1: ......
