1 0
I n s t r u c t I o n m a n ua l
G X 7 0 0
To transmit on channel 16 while Triple Watching
Press the
16
key. triple watch will be cancelled and the radio will switch straight to channel 16.
now press the
PTT
and transmit in the usual way. When your conversation has ended, press the
TW
key to return to the triple Watch function.
SCANNING
the scan function allows the GX700 to scan a series of user selected channels looking for
activity. scanning is done in an ascending sequence at a rate of 10 channels per second.
channels can be selected and stored for scanning from any of the available channels.
1
2
3
4
e.g. scanning channels 1, 2, 3 & 4
NOTE:
the transmitter is disabled while scanning. If the
PTT
is pressed, a low beep will be
heard and the
PTT
is ignored.
To add or remove scan channels
channels that are stored in the scan memory will display ‘m’ to the upper right of the channel
number. to add or remove channels from the scan memory, first select the required channel
using the or keys.
•
If ‘m’ is not displayed, press and hold the
SCN
key to add the channel to the scan memory.
the channel number will flash, the radio will give a high beep and ‘m’ will appear.
•
If ‘m’ Is displayed, press and hold the
SCN
key to remove the channel from the scan
memory. the channel number will flash, the radio will give a low beep and ‘m’ will disappear.
To begin scanning
Briefly press the
SCN
key. the GX700 will scan upwards through the stored channels at 10
channels per second and the display will show rapidly changing channel numbers. If a signal is
located, scanning will pause and the receiver will remain on that channel until 5 seconds after
the signal has gone. scanning will then resume.
To stop scanning
Briefly press the
SCN
key again. the radio will return to the last selected channel.
Scanning features
If the scan is paused on a busy channel and you wish to remain there;
Briefly press the
SCN
key. the scan will be cancelled and the radio will remain on that channel.
to resume scanning, briefly press the
SCN
key again.
If the scan is paused on a busy channel and you wish to skip over that channel
Briefly press the or keys. the scan will resume from the next channel in sequence.
If the scan is paused on a busy channel and you wish to transmit on that channel
simply press the
PTT
. scanning will be cancelled and the radio will remain on that channel.
NOTE:
If the
PTT
is pressed at any other time while scanning, a low beep will be heard and the
PTT
will be ignored.
Summary of Contents for GX700
Page 1: ......
