manualshive.com logo in svg

GEM 567 servoDrive, Operating Instructions Manual

Share
Download
GEM 567 servoDrive Operating Instructions Manual Download Page 28

www.gemu-group.com

28 / 45

GEMÜ 567 servoDrive

8 Manufacturer's information

8 Manufacturer's information

The controller required for valve operation is not included in

the scope of delivery.

8.1 Delivery

●

Check that all parts are present and check for any damage

immediately upon receipt.

The product's performance is tested at the factory. The scope

of delivery is apparent from the dispatch documents and the

design from the order number.

8.2 Packaging

The product is packaged in a cardboard box which can be re-

cycled as paper.

8.3 Transport

1. Only transport the product by suitable means. Do not drop.

Handle carefully.

2. After the installation dispose of transport packaging ma-

terial according to relevant local or national disposal regu-

lations / environmental protection laws.

8.4 Storage

1. Store the product free from dust and moisture in its ori-

ginal packaging.

2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see

chapter "Technical data").

4. Do not store solvents, chemicals, acids, fuels or similar

fluids in the same room as GEMÜ products and their spare

parts.

9 Installation in piping

9.1 Installation location

 CAUTION

●

Do not apply external force to the valve.

●

Choose the installation location so that the valve cannot

be used as a foothold.

●

Lay the pipeline so that the valve body is protected

against transverse and bending forces, and also vibra-

tions and tension.

●

Only install the valve between matching aligned pipes.

NOTICE

●

Für einen entleerungsoptimierten Einbau den Antrieb

waagerecht einbauen.

●

The flow direction of the working medium is indicated by

an arrow on the valve body.

in open and closed position

in open position

9.2 Preparing for installation

 WARNING

The equipment is subject to pressure!

▶

Risk of severe injury or death.

●

Depressurize the plant.

●

Completely drain the plant.

 WARNING

Corrosive chemicals!

▶

Risk of caustic burns.

●

Wear suitable protective gear.

●

Completely drain the plant.

 CAUTION

Hot plant components!

▶

Risk of burns.

●

Only work on plant that has cooled

down.

 CAUTION

Exceeding the maximum permissible pressure.

▶

Damage to the product.

●

Provide precautionary measures against exceeding the

maximum permitted pressures caused by pressure

surges (water hammer).

 CAUTION

Use as step.

▶

Damage to the product.

▶

Risk of slipping-off.

●

Choose the installation location so that the product can-

not be used as a foothold.

●

Do not use the product as a step or a foothold.

NOTICE

Suitability of the product!

▶

The product must be appropriate for the piping system

operating conditions (medium, medium concentration,

temperature and pressure) and the prevailing ambient

conditions.

Summary of Contents for 567 servoDrive














































Reviews:

No comments

Brands by name

Popular brands

Load more brands