GEM 549 eSyDrive, Operating Instructions Manual

Page: 9 / 47

5 Order data
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Order codes
1 Type Code
Angle seat globe valve, motorized,
electro-mechanical hollow shaft actuator,
eSyDrive
549
2 DN Code
DN 10 10
DN 15 15
DN 20 20
DN 25 25
DN 32 32
DN 40 40
DN 50 50
DN 65 65
DN 80 80
3 Body configuration Code
2/2-way body D
Angle valve body E
4 Connection type Code
Spigot
Spigot DIN 0
Spigot EN 10357 series B,
formerly DIN 11850 series 1
16
Spigot EN 10357 series A (formerly DIN 11850 series
2)/DIN 11866 series A
17
Spigot SMS 3008 37
Spigot ASME BPE 59
Spigot ISO 1127/EN 10357 series C/DIN 11866 series B 60
Spigot ANSI/ASME B36.19M schedule 10s
63
Spigot ANSI/ASME B36.19M schedule 40s 65
Threaded connection
Threaded socket DIN ISO 228 1
Threaded socket Rc ISO 7-1,
EN 10226-1, JIS B 0203, BS 21,
end-to-end dimension ETE DIN 3202-4 series M8
3C
Threaded socket NPT,
end-to-end dimension ETE DIN 3202-4 series M8
3D
Threaded spigot DIN ISO 228 9
Flange
Flange EN 1092, PN 25, form B,
face-to-face dimension FTF EN 558 series 1, ISO 5752,
basic series 1
10
Flange EN 1092, PN 25, form B 13
Flange ANSI Class 150 RF 47
Clamp
Clamp ASME BPE,
face-to-face dimension FTF ASME BPE
80
Clamp DIN 32676 series B,
face-to-face dimension FTF EN 558 series 1
82
4 Connection type Code
Clamp DIN 32676 series A,
face-to-face dimension FTF EN 558 series 1
86
Clamp ASME BPE,
face-to-face dimension FTF EN 558 series 1
88
5 Valve body material Code
1.4435, investment casting 34
1.4408, investment casting 37
1.4435 (F316L), forged body 40
1.4435, investment casting C2
6 Seat seal Code
PTFE 5
PTFE, glass fibre reinforced 5G
1.4404 10
7 Voltage/frequency Code
24 V DC C1
8 Control module Code
OPEN/CLOSE, positioner and process controller L0
9 Regulating cone Code
Please find the number of the optional regulating cone
(R-No.) for the linear or equal-percentage modified
regulating cone in the Kv value table.
R….
10 Actuator version Code
Actuator size 0 0A
Actuator size 1 1A
Actuator size 2 2A
11 Type of design Code
Ra ≤ 0.6 μm (25 μinch) for media wetted surfaces,
in accordance with ASME BPE SF2 + SF3
mechanically polished internal
1903
Ra ≤ 0.8 µm (30 µinch) for media wetted surfaces,
in accordance with DIN 11866 H3,
mechanically polished internal
1904
Ra ≤ 0.4 μm (15 μinch) for media wetted surfaces,
in accordance with DIN 11866 H4, ASME BPE SF1
mechanically polished internal
1909
12 Special version Code
Special version for oxygen,
maximum medium temperature: 60 °C,
media wetted seal materials and auxiliary materials with
BAM testing
S
13 CONEXO Code
Without
Integrated RFID chip for electronic identification and
traceability
C
5 Order data
www.gemu-group.com 9 / 47 GEMÜ 549 eSyDrive