background image

www.gemu-group.com

8 / 31

GEMÜ 343 eSyDrive

4 GEMÜ CONEXO

3.6 Regulating cone/regulating cage

Regulating cone

Regulating cage

Regulating cone: DN 15 - 50 Regulating cage: DN 65 - 100

4 GEMÜ CONEXO

Order with CONEXO

GEMÜ CONEXO must be ordered separately with the ordering
option "CONEXO" (see order data).

For electronic identification purposes, each replaceable com-
ponent contained in the product is equipped with an RFID
chip (1). Where you can find the RFID chip differs from
product to product.

1

The CONEXO pen helps read out information stored in these
RFID chips. The CONEXO app or CONEXO portal is required to
view this information.

5 Correct use

 DANGER

Danger of explosion

Risk of death or severe injury.

Do 

not

 use the product in potentially

explosive zones.

 WARNING

Improper use of the product

Risk of severe injury or death.

Manufacturer liability and guarantee will be void.

Only use the product in accordance with the operating
conditions specified in the contract documentation and
in this document.

The product is designed for installation in piping systems
and for controlling a working medium.

The product is not intended for use in potentially explosive
areas.

Use the product in accordance with the technical data.

Summary of Contents for 343 eSyDrive
































Reviews: