Outdoor lamp
Material: Aluminium and glass
Designed for outdoor use - IP44
Max. 35 W GU10 (excl. bulb)
Assembly instructions:
The usual precautions apply.
All components of the lamp should be installed correctly.
The lamp must be installed with a licensed electrician.
Change of bulb:
1. Turn of the main power supply switch
2. Remove the lower part of the head lamp (see illustration)
3. Screw in the new bulb (use only the recommended types)
4. Re-install the cover
5. Turn on the power
220-240 V
~
50 Hz
Contains: Complete lamp (excl. bulb)
IP44 - for outdoor use
www.gelia.se
INSTALLATION INSTRUCTIONS
Warning:
• This lamp MUST be installed by a qualified electrical contractor ONLY
• Warning: Before obtaining access to terminals, all supply circuits must
be disconnected
• This appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely. Young children
should be supervised to ensure that they do not play with the appliance.
• The bulb, lamp holder or shade may get hot when the lamp is operating,
do not touch them to avoid a hazard.
• To prevent damage to the appliance do not use alkaline cleaning agents
when cleaning. Use a soft cloth and a mild detergent. Always switch off
before cleaning.
• Failure to maintain the lamp in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED
CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Installation Procedures:
1. Dismantle the front cover and back fitting, put back fitting against the
mounting surface
2. Drive in 2 screws to fasten back fitting and connect to power
3. Fasten 2 screws for 2 magnetic parts
4. Install the lamp.
5: Put the lamp shade on.
5
6
1
2
3
4
