www.gelia.se
Utomhus lampa
Material: Aluminium och glas
Designad för utomhusbruk - IP44
Max. 35 W GU10 (exkl. ljuskälla)
Monteringsanvisningar:
De vanliga försiktighetsåtgärderna gäller.
Alla komponenter i lampan ska installeras på rätt sätt.
Lampan skall installeras av en behörig elektriker.
Byte av en ljuskälla:
1. Stäng av huvudströmbrytaren
2. Ta bort den nedre delen av huvudet på lampan (se illustration)
3. Skruva i den nya ljuskällan (använd endast de rekommenderade typerna)
4. Sätt tillbaka glaset
5. Slå på strömmen
220-240 V
~
50 Hz
Innehåller: Komplett lampa (exkl. ljuskälla)
IP44 - för utomhusbruk
INSTALLATION INSTRUCTIONS
Warning:
• This lamp MUST be installed by a qualified electrical contractor ONLY
• Warning: Before obtaining access to terminals, all supply circuits must
be disconnected
• This appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely. Young children
should be supervised to ensure that they do not play with the appliance.
• The bulb, lamp holder or shade may get hot when the lamp is operating,
do not touch them to avoid a hazard.
• To prevent damage to the appliance do not use alkaline cleaning agents
when cleaning. Use a soft cloth and a mild detergent. Always switch off
before cleaning.
• Failure to maintain the lamp in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED
CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Installation Procedures:
1. Dismantle the front cover and back fitting, put back fitting against the
mounting surface
2. Drive in 2 screws to fasten back fitting and connect to power
3. Fasten 2 screws for 2 magnetic parts
4. Install the lamp.
5: Put the lamp shade on.
5
6
1
2
3
4
