Geislinger Levitaz Hydrofoil Manual Download Page 19

 

WARRANTY POLICY 

GDM001167-ENG-E 

 

 

 

 

 

 

Manufacturer:  LEVITA

Z

 

19 / 20 

 

Contact: 

[email protected] 

Confidentiality code: GREEN

 

 

WARRANTY POLICY 

 

Levitaz warrants this product to be free from major defects —  in material or 

workmanship  —  to the consumer, as defined by the Consumer Protection Act for a 

period of 24 month within the EU and six months outside the EU. If the customer is a 

company, it must inspect the goods provided immediately for non-conformances in 

quality and defects and must notify us in writing within two weeks from receipt of the 

goods; otherwise, assertion of warranty claims is excluded. To meet the deadline, the 

notice must be sent on time. 

This warranty is subject to the following limitations: 

The warranty is valid only when this product is used for normal recreational activities 

and does not cover products used in rental or teaching operations. 

Levitaz will make the final warranty determination, which may require inspection and/or 

photos of the equipment, which clearly show the defect(s). If necessary, this 

information must be sent to the Levitaz head office or distributor in your country – 

postage prepaid. Product may be returned only if a return authorization is given in 

advance by the Levitaz head office or official distributor.  

If a product is deemed to be defective by Levitaz, the warranty covers the repair or 

replacement of the defective product only. Levitaz will not be responsible for any costs, 

losses or damages incurred as a result of loss of use of this product. 

This warranty does not cover damage caused by misuse, abuse, neglect or normal wear 

and tear including, but not limited to: punctures, rigging with other than Levitaz 

components, damage due to excessive sun exposure or damage caused by improper 

handling and storage, damage caused by use in waves or shore break and damage 

caused by crashing the foil at high speed, or damage caused by anything other than 

defects in material and workmanship. 

This warranty is void if any unauthorized repair, change or modification has been made 

to any part of the equipment. The warranty for any repaired or replaced equipment is 

good from the date of the original purchase only. The original purchase receipt must 

accompany all warranty claims. The name of the retailer and date of purchase must be 

clear and legible. 

There are no warranties which extend beyond the warranty specified herein. 

 

 

Summary of Contents for Levitaz Hydrofoil





















Reviews: