HYDROFOIL INSTALLATION INSTRUCTIONS
GDM001167-ENG-E
Manufacturer: LEVITA
Z
10 / 20
Contact:
Confidentiality code: GREEN
5
HYDROFOIL INSTALLATION INSTRUCTIONS
1.
Place the fuselage with the recess
facing upwards. Place angle shim in
correct direction (* if recommended for
your model). Put the rear wing onto the
(angle shim and) recess of the fuselage.
Tighten both screws M6x14 to 9 ±1 Nm
tightening torque with the Levitaz
mounting tool.
Figure 5.1
2.
Turn the fuselage with the rear wing
180°. The screw heads always point to
the board.
Figure 5.2
3.
Now put the fuselage (screw heads
point to the board) into the through hole
of the mast. Push it until the fuselage
touches the end and align the fuselage
and the mast screw holes.
Figure 5.3
1
( )*
*Optional angle shim
2
Turn rear wing 180°
Screw heads
always point
to the board
3
Summary of Contents for Levitaz Hydrofoil
Page 1: ...LEVITAZ Hydrofoils Manual ...
