MAINTENANCE AND REPAIR INFORMATION
GDM001167-ENG-E
Manufacturer: LEVITA
Z
17 / 20
Contact:
Confidentiality code: GREEN
8
MAINTENANCE AND REPAIR INFORMATION
8.1
Maintenance
Clean all hydrofoil parts with fresh water after every use and dry the parts. Disassemble
and rinse with fresh water after every use. Always store the disassembled product in its
covers and the durable carrier bag for optimal protection.
NOTICE!
Failure to do so may cause serious damage to the product and
void the warranty.
8.2
Repair information
INSPECTED CONDITION
CORRECTIVE MEASURE
Visible fiber failure or any other
heavy damage like delamination
(separation of the single layers of
the composite).
DO NOT REPAIR
the reinforced plastic components!
Dismantle the product and send it back to Levitaz.
It is not clear if the damage is
critical or not.
Take a photo, document the extent of the damage and
contact Levitaz for advice.
If any other damage or wear to the product is identified but not described in this table,
contact Levitaz to identify the appropriate corrective measure. See www.levitaz.com
Dispose of worn parts as instructed in the chapter “Disposing of used parts”.
9
DISPOSING OF USED PARTS
After replacing individual components:
•
All metal parts can be recycled (scrap metal).
•
All old fiber reinforced plastic parts must be disposed of as residual waste.
Federal, state and local regulations must always be observed when disposing of the
product or parts thereof.
Summary of Contents for Levitaz Hydrofoil
Page 1: ...LEVITAZ Hydrofoils Manual ...
