Gehl Dyna-Handler 562, Operator'S Manual

Page: 44 / 72

Internal service on any of these components should
only be attempted by (or under the direction of) an
authorized GEHL Telescopic Forklift dealer. WAR-
RANTY repairs can only be done by a GEHL dealer.
WARNING
Tilt, lift, extend and leveling cylinders have
counterbalance valves. These valves keep
hydraulic fluid from entering or exiting the
cylinders while not being used, and are under
extremely high pressure. For your safety,
before removing any of these valves, you
must call Gehl Service. Failure to do so may
result in serious injury or death.
He will know what portions of the machine are covered
under the terms of the GEHL warranty and what por-
tions are covered by other vendor warranties.
ELECTRICAL COMPONENTS
An electrical system schematic is provided which
includes instrumentation, electrical components and
switch connections. It is located at the end of this man-
ual and can be used as a guide for service reference, as
required.
OPERATOR SERVICES
Some of the operator related services will require
access to components located inside the superstructure
under shields, hoods and covers. The reference chart
on this page notes components accessed in each partic-
ular area.
Component Operator Frame Front Mid-Rear
Station Cover Hood
Axle (underside)
z
Engine
z
Transmission (mid area)
z
Drive Shafts (underside)
z
Main Control Valve (rear)
z
Muffler (underside)
z
Air Cleaner (top fuel tank)
z
Battery
z
Radiator
z
Brake Valve (underside)
z
Travel Controls (dash area)
z
Boom Controls (right side)
z
Hydraulic Test Ports (dash)
z
Hourmeter (dash)
z
Switches/Indicators (dash)
z
Hydraulic Pump
z
Hydraulic Filter (Reservoir)
z
Misc. Hydraulic Valves
z
Air Conditioner (rear)
z
Heater (lower front)
z
ACCESS TO COMPONENTS REFERENCE CHART
907880/AP1298
42
PRINTED IN U.S.A.
Courtesy of CraneMarket.com