Gehl Dyna-Handler 562, Operator'S Manual, Page: 35 / 72

Digging, Loading and Carrying Bucket
PRINTED IN U.S.A.
33
907880/AP1298
Dumping the Load Onto a Pile
Slowly stop forward motion upon reaching the pile.
Raise and extend the boom high enough so that the
bucket clears the top of the pile. Slowly move the
machine ahead to position the bucket for dumping.
Empty the bucket and back the machine away while
retracting and lowering the boom, and rolling the buck-
et back.
Dumping the Load Into a Box
With the load low, approach the truck or trailer box
squarely with the side. Stop your approach as close to
the side of the box as possible while still allowing
clearance for raising and extending the boom. Raise
and extend the boom until the bucket clears the top of
the box. Slowly position the bucket over the inside of
the box. Dump the material then retract and lower the
boom while rolling the bucket back.
Table of Common Materials & Densities
Material Density
in (lb./yd 3 )
Ashes 945-1350
Brick-common 3024
Cement 2970
Charcoal
621
Clay 2160-2700
Coal 1431-1701
Concrete 3105
Cinders 1350
Coal-anthracite 2538
Coke 810
Earth-dry loam 810
Earth-wet loam 1755
Granite 2511-2997
Gravel-dry 1782
Gravel-wet 2430
Gypsum-crushed 3105
Iron Ore 3915
Lime 1620
Lime Stone 2430
Manure-liquid 1755
Manure-solid 1215
Peat-solid 1269
Phosphate-granular 2430
Potash 1836
Quartz-granular 2970
Salt-dry 2700
Salt-rock solid 3645
Sand-dry 2916
Sand-wet 3375
Sand-foundry 2565
Shale-crushed 2430
Slag-crushed 1890
Snow 405-1350
Sulpha 2565
Taconite 2889
Digging in
Loose Materials
Digging in
Hard-packed
Materials
Loading the
Bucket
Carrying the
Load
Courtesy of CraneMarket.com