Gehl 503Z, Operator'S Manual, Page: 38 / 132

Printed in U.S.A. 2-10 918070/FP0811
• Secure the machine against unintentional
movement. Use taglines as needed.
• Do not lift the machine with persons on or in
the machine.
• Any person guiding the crane operator must be
within sight or sound of the crane operator.
• Lift the machine only with the standard bucket
installed, the bucket empty and in the transport
position.
• Persons must stay clear of and not under the
machine when it is lifted.
• Fasten the rigging equipment so the machine is
horizontal when it is lifted.
• Do not lift the machine by the eye hooks on
the cab. Attach the rigging equipment only at
the lift points identified by this symbol:
TRANSPORTING
Obey state and local over-the-road regulations. Check
state and local restrictions regarding weight, width and
length of a load. The hauling vehicle, trailer and load
must all be in compliance with local regulations. See
“Loading and Transporting” on page 3-40.
SAFETY DECALS
The machine has decals shown on the following pages
that provide safety information and precautions. These
decals must be kept legible. If missing or illegible, they
must be replaced promptly. Replacements can be
obtained from your dealer.
Refer to the Parts Manual for decal part numbers and
ordering information.
New Decal Application
Surfaces must be free of dirt, dust, grease and foreign
material before applying the decal. Remove the smaller
portion of the decal backing paper and apply the
exposed adhesive to the clean surface, maintaining
proper position and alignment. Peel the rest of the
backing paper and apply hand pressure to smooth out
the decal surface. Refer to the following pages for
proper decal locations.
If replacing a part that has a decal on it, ensure that the
replacement part has the same decal.