Printed in U.S.A.
4-26
918070/FP0811
Windshield Washer Fluid
1. Shut off the engine. Remove the ignition key and
take it with you. Lock-out the controls by raising
left control console.
2.
Open the engine cover
.
3. Locate the windshield washer reservoir (Figure 4-
25), above the radiator.
4. Open the windshield washer reservoir cover (1,
Figure 4-25) and fill the tank with windshield
washer fluid.
5. Close the windshield washer tank cover securely.
6. Close and latch the engine cover.
Figure 4-25 Windshield Washer Fluid
Reservoir
LONG-TERM STORAGE
If storing the machine for a long period (longer than
two months), perform the procedures in this section.
Before Storage
1. Wash the entire machine.
2. Lubricate all grease zerks. See “Lubrication
Points” on page 4-9.
3. Change the engine oil and filter according to
“Changing Engine Oil and Filter” on page 4-10.
4. Add a fuel stabilizer to the fuel system according to
the fuel supplier’s recommendations.
5. Remove and fully charge the battery. Store the bat-
tery in a cool, dry location.
6. If the machine will not be operated for a month or
longer, apply grease to all exposed hydraulic cylin-
der rod areas or retract all cylinders so rod expo-
sure is minimized. Apply grease to any remaining
rod areas.
7. If the ambient temperature (at any time during the
storage period) is expected to drop below freezing,
make sure the engine coolant is either completely
drained from the radiator and engine block or that
the amount of anti-freeze in it is adequate to keep
the coolant from freezing. Refer to the engine man-
ual for anti-freeze recommendations and quanti-
ties.
8. Protect against extreme weather conditions such as
moisture, sunlight and temperature.
1
Summary of Contents for 503Z
Page 6: ...Printed in U S A iv 918070 FP0811 NOTES ...
Page 28: ...Printed in U S A 1 22 918070 FP0811 INTENTIONALLY BLANK To be removed as dealer s file copy ...
Page 90: ...Printed in U S A 3 44 918070 FP0811 NOTES ...
Page 94: ...Printed in U S A 4 4 918070 FP0811 Maintenance Label ...