10.
Adjustment of Projector
10.1
Adjustment of picture height by fine tilting of projection mirror (Pic.5. Never
operate the projector while projection mirror is closed (Pic.6. Never touch hot
parts, risk of skin burn is very high!!! (Pic.7.
Pic.5
Pic.6
Pic.7
10.2
Adjustment of focus by turning the control wheel for height of the lens (Pic.8.
This adjustment is depending on projection distance to the screen.
Pic.8
Pic.9
10.3
If blue or brown seams occur, just adjust the height of the lamp housing by
turning the adjustment wheel for colorseam correction (Pic.9, outer
adjustment wheel).
If a lamp gets faulty, you can easily change to the
second lamp just by operating the lamp changer
(Pic.10). Before replacement of the lamp the
projector must be cooled down
completely (at least for 30 minutes)
and must be disconnected from mains.
Pic.10
9
