manualshive.com logo in svg

gefran GF VEDO SL Series, Installation And User Manual

Share
Download
gefran GF VEDO SL Series Installation And User Manual Download Page 27

27

80991C_MHW_GF_VEDO SL_09-2017_ENG

Model

Description

Code

GF_VEDO SL 70CT LX0 00 00 00 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, integrated SoftPLC [standard IEC61131-3], ARM9, 

400MHz processor, Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with 

backup battery, IP65 front panel protection, 10 programmable function 

keys [F1…F10] 

F055187

GF_VEDO SL 70CT LX0 00 00 U1 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, USB port, integrated SoftPLC [standard IEC61131-

3], ARM9, 400MHz processor, Flash 128 MB, DRAM 64 MB, FRAM 32 

KB, RTC with backup battery, IP65 front panel protection, horizontal 

installation, 10 programmable function keys [F1…F10]

F056920

GF_VEDO SL 70CT LX0 S1 00 00 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port,  RS485 port,  RS232 port and SD slot, integrated 

SoftPLC [standard IEC61131-3], ARM9, 400MHz processor, Flash 128 

MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery, IP65 front 

panel protection, horizontal installation, 10 programmable function keys 

[F1…F10] 

F056934

GF_VEDO SL 70CT LX0 00 C1 00 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, CAN port, integrated SoftPLC [standard IEC61131-

3], ARM9, 400MHz processor, Flash 128 MB, DRAM 64 MB, FRAM 32 

KB, RTC with backup battery, IP65 front panel protection, horizontal 

installation, 10 programmable function keys [F1…F10] 

F056921

GF_VEDO SL 70CT LX0 S1 C1 00 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, CAN port, RS485 port,  RS232 port and SD slot, 

integrated SoftPLC [standard IEC61131-3], ARM9, 400MHz processor, 

Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery, 

IP65 front panel protection, horizontal installation, 10 programmable 

function keys [F1…F10] .

F056922

GF_VEDO SL 70CT LX0 S1 00 U1 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, USB port, RS485 port,  RS232 port and SD slot, 

integrated SoftPLC [standard IEC61131-3], ARM9, 400MHz processor, 

Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery, 

IP65 front panel protection, horizontal installation,  10 programmable 

function keys [F1…F10].

F056935

GF_VEDO SL 70CT LX0 00 C1 U1 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management of the 

machine and process automation. 7” TFT colors display, 262K colors, 

resolution 800x480 pixels WVGA, analog and resistive touch screen, 

Build-in Ethernet port, CAN port, USB port, integrated SoftPLC [standard 

IEC61131-3], ARM9, 400MHz processor, Flash 128 MB, DRAM 64 MB, 

FRAM 32 KB, RTC with backup battery, IP65 front panel protection, 

horizontal installation,  10 programmable function keys [F1…F10].

F054749

GF_VEDO SL 70CT LX0 S1 C1 U1 K1 G

GF_VEDO SL 70CT Integrated unit for  the complete management 

of the machine and process automation. 7” TFT colors display, 262K 

colors, resolution 800x480 pixels WVGA, analog and resistive touch 

screen, Build-in Ethernet port, CAN port, RS485 port,  RS232 port and 

SD slot, USB port, integrated SoftPLC [standard IEC61131-3], ARM9, 

400MHz processor, Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC 

with backup battery, IP65 front panel protection, horizontal installation,  10 

programmable function keys [F1…F10]

F054748

GF_VEDO SL 70CT color touch with 10 programmable function keys

Summary of Contents for GF VEDO SL Series

































Reviews:

No comments

Brands by name

Popular brands

Load more brands