manualshive.com logo in svg

gefran GF VEDO SL Series, Installation And User Manual

Share
Download
gefran GF VEDO SL Series Installation And User Manual Download Page 23

23

80991C_MHW_GF_VEDO SL_09-2017_ENG

Model 

Description

Code

GF_VEDO SL 35CT LX0 00 00 00 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, 

Built-in Ethernet port, integrated SoftPLC [standard IEC61131-3], ARM9, 

400MHz processor,  Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with 

backup battery , IP65 front panel protection

F055183

GF_VEDO SL 35CT LX0 00 00 U1 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, Built-

in Ethernet port and USB port, integrated SoftPLC [standard IEC61131-3], 

ARM9, 400MHz processor,  Flash 128 MB, DRAM 64 MB, FRAM 32 KB, 

RTC with backup battery , IP65 front panel protection.

F055185

GF_VEDO SL 35CT LX0 S1 00 00 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, 

Built-in Ethernet port,  RS485 port,  RS232 port and SD slot, integrated 

SoftPLC [standard IEC61131-3], ARM9, 400MHz processor,  Flash 128 

MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery , IP65 front 

panel protection

F056398

GF_VEDO SL 35CT LX0 00 C1 00 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, Built-

in Ethernet port and CAN port, integrated SoftPLC [standard IEC61131-3], 

ARM9, 400MHz processor,  Flash 128 MB, DRAM 64 MB, FRAM 32 KB, 

RTC with backup battery , IP65 front panel protection

F056879

GF_VEDO SL 35CT LX0 S1 C1 00 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, 

Built-in Ethernet port,  RS485 port,  RS232 port, CAN port and SD slot, 

integrated SoftPLC [standard IEC61131-3], ARM9, 400MHz processor,  

Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery, 

IP65 front panel protection

F056880

GF_VEDO SL 35CT LX0 S1 00 U1 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, 

Built-in Ethernet port,  RS485 port,  RS232 port, USB port and SD slot, 

integrated SoftPLC [standard IEC61131-3], ARM9, 400MHz processor,  

Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with backup battery, 

IP65 front panel protection

F056882

GF_VEDO SL 35CT LX0 00 C1 U1 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, Built-

in Ethernet port, CAN port and USB port, integrated SoftPLC [standard 

IEC61131-3], ARM9, 400MHz processor,  Flash 128 MB, DRAM 64 MB, 

FRAM 32 KB, RTC with backup battery , IP65 front panel protection

F054747

GF_VEDO SL 35CT LX0 S1 C1 U1 00 G

GF_VEDO SL 35CT Integrated unit for the complete management of the 

machine and process automation. 3.5” TFT color display, 262K colors,  

resolution 320x240 pixels QVGA, analog and resistive touch screen, 

Built-in Ethernet port,  RS485 port,  RS232 port, CAN port, USB port 

and SD slot, integrated SoftPLC [standard IEC61131-3], ARM9, 400MHz 

processor,  Flash 128 MB, DRAM 64 MB, FRAM 32 KB, RTC with backup 

battery, IP65 front panel protection

F055906

GF_VEDO SL 35CT color touch

Summary of Contents for GF VEDO SL Series

































Reviews:

No comments

Brands by name

Popular brands

Load more brands