gefran 80537, Instruction Manual

Page: 9 / 14

80537_MAN_VDA-I_10-2017_ENG 7
3. OPERATION
3.1. Power-on
Power is supplied by the controller to which the amplifier is
connected; therefore, the amplifier is powered on and off
simultaneously with the controller.
3. OPERATION
3.2. Reset
The reset function is used to tare/zero the output signal.
To run a Reset, supply voltage from 12 to 36 V for at least 25
ms (there are no limits to longer durations) to the Reset input
of the function in question.
It’s possible to tare an input signal up to 500%FS with the
amplifier. If the signal is higher than 500%FS, it is not possib -
le to tare the signal anymore.
With the power-on reset function the amplifier generates a
reset signal when power is applied to device.
10
0
15
28
V
Operative Reset
> 25 ms
Operative t
24