background image

80537_MAN_VDA-I_10-2017_ENG

2

INTRODUCTION

Device data

In the space below, write the order code and other plate data 

shown on the label attached to the outside of the amplifier 

(see figure). 

If you need technical assistance, this information must be gi

-

ven to Gefran Customer Service.

VDA-I

Serial No.

Order code

Warnings and safety

Make sure that you always have the latest version of this ma-

nual, downloadable at no cost from Gefran’s website (www.

gefran.com). 

The devices described in this manual must be installed by 

trained  personnel  in  conformity  to  current  laws  and  regula

-

tions, following all of the instructions in this manual.

Installers and/or maintenance personnel MUST read this ma-

nual and scrupulously follow all of the instructions contained 

herein and in the attachments. 

Gefran will not be liable for any damage/harm caused to per

-

sons and/or property, or to the device itself, if all of such inst-

ructions are not followed.

INTRODUCTION

Disposal

The amplifier VDA-I must be disposed of in conformity to current laws and regulations.

If not correctly disposed of, some of the components used in the devices may harm the environment.

Disclaimer

Although all of the information in this manual has been care

-

fully  checked,  Gefran  S.p.A.  assumes  no  liability  regarding 

the presence of any errors or regarding damage to property 

and/or harm to individuals due to any improper use of this 

manual

Gefran S.p.A. also reserves the right to change the contents 

and form of this manual, as well as the characteristics of the 

devices described herein, at any time and without notice. The 

technical data and performance levels specified in this ma

-

nual  are  to  be  considered  a  guide  for  the  user  in  order  to 

determine the device’s suitability for a defined use, and do not 

constitute a guarantee.

They may be the result of test conditions at Gefran S.p.A., 

and the user must compare them to his/her real application 

requirements.

Under no circumstances will Gefran S.p.A. be liable for any 

damage to property and/or harm to individuals due to tampe

-

ring, incorrect or improper use, or use not conforming to the 

characteristics of the amplifier to the instructions contained in 

this manual.

Copyright

This manual and its attachments may be freely reproduced 

provided its contents are not changed in any way and provi

-

ded every copy includes the above Disclaimer and the state-

ment of ownership of Gefran S.p.A.

Gefran and Sensormate are registered trademarks of Gefran 

S.p.A.

This manual may make reference to or reproduce trademarks 

and logos of third parties. Gefran S.p.A. acknowledges such 

parties’ ownership of these trademarks and logos.

Summary of Contents for 80537















Reviews: