7
BYPASS AND STANDBY MODES
Bypass Mode
Bypass mode is recommended when listening to music or watching movies which have a wide dynamic
range. To place the GefenTV Auto Volume Stabilizer in Bypass Mode, press the Bypass button on the
front panel. Bypass Mode can also be activated by pressing the BYPASS button on the remote (GTV-
VOLC-IR). When the unit is in Bypass Mode, the Bypass LED will turn red. Dolby Volume™ processing
is now disabled. To enable Dolby Volume™ processing, press the Bypass button on the front panel
again or use the BYPASS button on the IR remote and the LED on the front panel will turn blue.
Standby Mode
Placing the GefenTV Audio Volume Stabilizer in Standby Mode allows the to minimize power (less than
1 W) when not in use. To place the GefenTV Auto Volume Stabilizer in Standby Mode, press and hold
the BYPASS button on the front panel. After a few seconds, the Bypass LED will turn red indicating
that the unit is in Standby Mode. Standby Mode can also be activated by pressing the BYPASS button
on the remote (GTV-VOLC-IR). Once in Standby Mode, press the BYPASS button on the front panel
to power-on the unit. The STANDBY button on the remote can also be use to power-on the unit from
Standby Mode.
7
BYPASS AND STANDBY MODES
Bypass Mode
Bypass mode is recommended when listening to music or watching movies which have a wide dynamic
range. To place the GefenTV Auto Volume Stabilizer in Bypass Mode, press the Bypass button on the
front panel. Bypass Mode can also be activated by pressing the BYPASS button on the remote (GTV-
VOLC-IR). When the unit is in Bypass Mode, the Bypass LED will turn red. Dolby Volume™ processing
is now disabled. To enable Dolby Volume™ processing, press the Bypass button on the front panel
again or use the BYPASS button on the IR remote and the LED on the front panel will turn blue.
Standby Mode
Placing the GefenTV Audio Volume Stabilizer in Standby Mode allows the to minimize power (less than
1 W) when not in use. To place the GefenTV Auto Volume Stabilizer in Standby Mode, press and hold
the BYPASS button on the front panel. After a few seconds, the Bypass LED will turn red indicating
that the unit is in Standby Mode. Standby Mode can also be activated by pressing the BYPASS button
on the remote (GTV-VOLC-IR). Once in Standby Mode, press the BYPASS button on the front panel
to power-on the unit. The STANDBY button on the remote can also be use to power-on the unit from
Standby Mode.
