6
6
CONNECTING AND OPERATING THE AUTO VOLUME STABILIZER
How to Connect the GefenTV Auto Volume Stabilizer
1.
Connect the audio source to the Audio Input section of the GefenTV Auto Volume Stabilizer using
the Optical, Coax and / or L/R analog audio cables.
2.
Connect another set of audio optical, coax, and / or L/R analog audio cables from the Audio Output
section of the GefenTV Auto Volume Stabilizer to the input(s) of the A/V equipment.
3.
Connect the included 5 V DC power adapter to the power receptacle on the rear of GefenTV Auto
Volume Stabilizer. The LED next to the BYPASS button will turn red, indicating that the unit is
powered and in Standby Mode.
4.
Press the BYPASS button to enable Dolby Volume™ processing.
5.
Bypass LED Status:
Red:
Standby Mode / Dolby Volume™ processing disabled / LPCM
audio.
Blue:
Dolby Volume™ processing with Dolby Digital™ decoding.
Purple:
Dolby Volume™ with Dolby Digital™ decoding disabled.
Off:
LPCM audio with Dolby Volume™ processing disabled.
6.
Select the desired input source (Optical, Coax, or L/R audio) by pressing the Input Select button
on the back of the unit. The SELECT button on the IR remote may also be used to select the input
source.
How to Connect the GefenTV Auto Volume Stabilizer
1.
Connect the audio source to the Audio Input section of the GefenTV Auto Volume Stabilizer using
the Optical, Coax and / or L/R analog audio cables.
2.
Connect another set of audio optical, coax, and / or L/R analog audio cables from the Audio Output
section of the GefenTV Auto Volume Stabilizer to the input(s) of the A/V equipment.
3.
Connect the included 5 V DC power adapter to the power receptacle on the rear of GefenTV Auto
Volume Stabilizer. The LED next to the BYPASS button will turn red, indicating that the unit is
powered and in Standby Mode.
4.
Press the BYPASS button to enable Dolby Volume™ processing.
5.
Bypass LED Status:
Red:
Standby Mode / Dolby Volume™ processing disabled / LPCM
audio.
Blue:
Dolby Volume™ processing with Dolby Digital™ decoding.
Purple:
Dolby Volume™ with Dolby Digital™ decoding disabled.
Off:
LPCM audio with Dolby Volume™ processing disabled.
6.
Select the desired input source (Optical, Coax, or L/R audio) by pressing the Input Select button
on the back of the unit. The SELECT button on the IR remote may also be used to select the input
source.
NOTE:
All outputs are live regardless of the selected input.
CONNECTING AND OPERATING THE AUTO VOLUME STABILIZER
