Gefen GEF-DVI-32432, User Manual

Page: 58 / 100

54
RS-232 / TELNET COMMANDS
r Command
The r command routes the specified input to the designated output(s).
Syntax:
r param1[...param9]
Parameters:
None
Notes:
Unlike other commands, do not precede the r command with the “#’ symbol.
If param2 = 0 , then the specified input will be routed to all outputs (also refer to the s com-
mand on the next page). If more than eight inputs need to be specified, then the r com-
mand must be executed twice.
Examples:
r 1 2
Input 1 is routed to outputs: 2
Routing Input 1 to Output 2
r 1 4 5 6 7 9 10
Input 1 is routed to outputs: 4 5 6 7 9 10
Routing Input 1 to Output 4
Routing Input 1 to Output 5
Routing Input 1 to Output 6
Routing Input 1 to Output 7
Routing Input 1 to Output 9
Routing Input 1 to Output 10
r 1 0
All outputs are routed to input 1
Routing Input 1 to all Outputs