Gefen GEF-DVI-32432, User Manual

Page: 47 / 100

43
RS-232 / TELNET COMMANDS
#set_telnet_username Command
The #set_telnet_username command assigns the Telnet username for login.
The underscore character (“_”) must be included when typing the command name.
The user name may contain a combination of letters and numbers. Special characters
and spaces are not permitted. If a space is required in the user name, use the underscore
character (“_”).
Syntax:
#set_telnet_username param1
Parameters:
param1
User name [20 characters max.]
Example:
#set_telnet_username doc_holiday
Telnet login updated to: doc_holiday
#sgateway Command
Specifies the new IP gateway. The IP address must be typed using Dot-decimal notation.
Syntax:
#sgateway param1
Parameters:
param1
IP address
Notes:
A reboot is required after using this command.
Example:
#sgateway 192.168.1.1
New IP Gatway set to: 192.168.1.1