24
RS-232 / TELNET / UDP COMMANDS
#set_tcp_term_port Command
The #set_tcp_term_port command sets the Telnet listening port. The default port
value is 23.
Syntax:
#set_tcp_term_port param1
Parameters:
param1
Port
[1
...
65535]
Notes:
The matrix must be rebooted after executing this command.
Example:
#set_tcp_term_port 20
New TCP Terminal port set to: 20
#set_udp_port Command
The #set_udp_port command sets the local UDP listening port. The default port value is 8.
Syntax:
#set_udp_port param1
Parameters:
param1
Port
[1
...
65535]
Notes:
The matrix must be rebooted after executing this command.
Example:
#set_udp_port 10
New UDP listening port set to: 10
