page | 17
Basic Operation
Setting the Video Channel
In order a Sender and Receiver unit to communicate with one another, they must both be
set to the same channel. This is similar to changing the channel on a cable or satellite
box in order to view a different program.
By default, all Sender and Receiver units are set to
channel 0. The channel can be changed using any one of the two methods: 1) Using the
-/Select
and
+/USB
buttons on the front panel. 2) Using the built-in Web interface.
Using the Front-Panel Buttons
1. Press the
-/Select
or
+/USB
buttons to display the current channel number.
Channel numbers range from 0 to 255.
2. Once the current channel is displayed, do one of the following:
Press the
-/Select
button to decrement the current channel number.
Press the
+/USB
button to increment the current channel number.
3. Once the desired channel number is selected, press and hold the
-/Select
button until
the channel number disappears from the screen.
4. The new channel number is now assigned to the Receiver unit.
NOTE:
When connecting Sender and Receiver units, it is highly
recommend that the video channel for each unit is set to a channel
other than 0. This will allow for the addition of future Sender and/or
Receiver units without causing video channel conflicts.
Channel:0
Operating the DVI KVM over IP with Local DVI Output
