Gefen EXT-DVI-441N User Manual Download Page 21

Page: 21 / 24

SPECIFICATIONS

Maximum Pixel Clock................................................................................165 MHz

Input Video Signal................................................................................1.2 Volts p-p

Input DDC Signal...........................................................................5 Volts p-p (TTL)

DVI Input Connectors......................................(4) DVI-I 29-pin female (digital only)

DVI Output Connectors...................................(1) DVI-I 29-pin female (digital only)

RS-232 Connector.........................................................................(1) DB-9, female

IR Extender Connector........................................................ (1) 3.5 mm mini-stereo

Power Supply.................................................................................................5V DC

Power Consumption........................................................................10 Watts (max.)

Dimensions..........................................................................14” W x 1.2” H x 2.9” D

Shipping Weight..............................................................................................7 lbs.

Summary of Contents for EXT-DVI-441N

























Search results

Summary of Contents for EXT-DVI-441N

Reviews:

Related manuals for EXT-DVI-441N

Brands by name

Popular brands

Gefen EXT-DVI-441N, User Manual

Search results

Summary of Contents for EXT-DVI-441N

Reviews:

Related manuals for EXT-DVI-441N

Brands by name

Popular brands