Gefen Pro GEF-MOD-848-1FO User Manual Download Page 55

Page: 55 / 142

page | 45

3. Press the

Set

button. The Set button will flash momentarily.

4. Once the

Set

button is pressed, the matrix will begin copying the default EDID

to the specified input.

The LCD will indicate that the matrix is copying the EDID:

After the EDID has been successfully copied to the selected input, the LCD will display

the following message:

6. After a few moments, the selected buttons will turn off and the LCD will return to the

Home screen.

EDID Management

Operating the 8x8 Modular Matrix

EDID LOADING

PLEASE WAIT

EDID LOADING

COPY COMPLETE

GEFEN

MODULAR MATRIX

EDID LOADING

PLEASE WAIT

Set button

Summary of Contents for GEF-MOD-848-1FO















































































































































Search results

Summary of Contents for GEF-MOD-848-1FO

Reviews:

Related manuals for GEF-MOD-848-1FO

Brands by name

Popular brands

Gefen Pro GEF-MOD-848-1FO, User Manual

Search results

Summary of Contents for GEF-MOD-848-1FO

Reviews:

Related manuals for GEF-MOD-848-1FO

Brands by name

Popular brands