background image

page | 2

Getting Started

Pre-Configured Options

The following list outlines the available pre-configured options.  Because this User Manual 

covers information on all available configurations, it is important to identify the type of 8x8 

Modular Matrix that was purchased.
 

• 

8 DVI Input / 8 DVI Output (GEF-MOD-848-DVI)

 

 

One input card using eight DVI inputs, providing a total of 8 DVI inputs. 

 

One output card using eight DVI outputs, providing a total of 8 DVI outputs. 

 

 

Packing List: 

 

(1) 8x8 Modular Matrix Frame

 

(1) Modular Matrix 8 DVI Input Card

 

(1) Modular Matrix 8 DVI Output Card

 

(1) DB-9 cable

 

(2) AC power cords

 

(1) Quick-Start Guide

• 

8 DVI Input / 8 CAT-5 ELR Output (GEF-MOD-848-DVIELR)

 

 

One input card using eight DVI inputs, providing a total of 8 DVI inputs. 

 

One output card using eight ELR-POL outputs.  Each of these ELR-POL outputs are 

connected to a Receiver unit, using a CAT-5e cable, allowing you to extend the DVI 

signal up to 330 feet (100 meters).  8 ELR-POL Receiver units are included with this 

package option. 

 

 

Packing List: 

 

(1) 8x8 Modular Matrix Frame

 

(1) Modular Matrix 8 DVI Input Card

 

(1) Modular Matrix 8 DVI Sender over CAT-5 Card

 

(8) DVI ELR Receivers with POL

 

(1) DB-9 Cable

 

(2) AC Power Cords

 

(1) Quick-Start Guide

 

Summary of Contents for GEF-MOD-848-1FO















































































































































Reviews: