page | 48
Advanced Operation
RS-232 / IP Commands
#set_telnet_port
The
#set_telnet_port
command sets the Telnet listening port. The matrix must
be rebooted after executing this command. The default port setting is
23
. Use the
command to display the current Telnet listening port.
Syntax
:
#set_telnet_port param1
Parameters
:
param1
Port
[1
...
1024]
Example
:
#set_telnet_port 24
TELNET COMMUNCATION PORT 24 IS SET. PLEASE REBOOT THE UNIT.
#set_webui_ad_pass
The
#set_webui_ad_pass
command sets the Administrator password for the Web GUI.
The password is case-sensitive and cannot exceed 7 characters in length. The default
password is
Admin
.
Syntax
:
#set_webui_ad_pass param1
Parameters
:
param1
Password
Example
:
#set_webui_ad_pass bossman
WEB UI ADMINISTRATOR PASSWORD IS SET
