page | 26
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Using the IR Remote Control
1. Press the
Input
button on the IR remote control.
2. The front panel display will indicate that routing mode is active.
3. Select an input (1 - 16) using the numerical keys on the IR remote control. For this
example, we will route Input 7 to Output 12. Enter the input by pressing button 7.
If an incorrect value is entered by accident, press the
Return
button.
4. Press the
Output
button.
port select
IN:
port select
IN: 7
Routing Basics
