page | 16
Standby Mode
After the AC power cord(s) is/are connected to the matrix, the LED indicator next to the
display will glow bright blue. The matrix is now in
standby mode
.
Standby mode is similar to powering-off the matrix. However, in standby mode, the matrix
can be powered-on by executing the
command. See
for more information on using the RS-232 / IP commands.
Powering the Matrix
1. From
standby mode
, press the
Power
button on the front panel.
2. The standby mode LED will turn off.
3. After a few moments, the
home screen
will be displayed:
4. To return to
standby mode
, press the
Power
button on the front panel.
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Basic Operation
GEFEN
16x16 matrix
Standby mode LED
Power
